Metal strip shearing and welding machine
1. Application:
It can be used for steel welding pipe production, continuous stamping production and other production. It can be finished the welding work of strip material (including stainless steel,carbon steel, galvanized strip,copper,aluminum) .
2.Features:
1. Adopt oblique shear; Two down knives should be fixed on the down knife base.The base connected the frame by screws.The up knife should be installed on the moved frame.There is oil tank to move for up knife support frame.
2. Tighten; The position should be on the frame.Make two strips to keep the level and press;Tighten the position to make right and left parts;It can be controlled the air cylinder by foot switch.
3. To butt joint of right and left two pieces of strip, clamping the middle of copper electrode plates by clamping device ;The welding torch should be fixed on the moved slider,It can be drive by screw shaft.
4. The screw shaft drive by motor; The motor can be adjusted speed by the inverter output frequency, then adjust the speed of welding torch.
5. The indicator is light for right and left ,it shows pressing tightly.on the contrary,it sends the materials.
6. It can be controlled by foot switch for right and left tight;The device will be move for foot action.
7. The shear foot switch is in the middle;The up knife will cut down for pressing the switch;Then the up knife will be back for loosening the switch.
8. Adjust method:arc strike at edge 1-2.5mm;arc failure at edge 0.5-4mm.
9. Motorized button:there are front and back buttons;it can be adjusted the welding torch position by hand.Position by the
indicator.
3. Packing & Delivery
1.Export Wooden Package
2.Free Fumigation Certification
3.Pallet for Fork Truck
4.Mark as buyer's requirement
4. Company profile
Baoding ZSHC Co., Ltd. was established in 2009, covering 20,000 square meters, with more than 100 employees. It has developed into a comprehensive enterprise integrating R&D, production, sales and service. The company mainly engaged in products: solid-state high-frequency welder, high-efficiency switch welder, intermediate-frequency annealing equipment,zinc spraying machine, shear butt welding, cooling equipment, palletizer, ultra-audio equipment and so on.
5. After-sales service
1. Marketing plan and support.
2. Technical explanation and solution developing
3. Company visit reception
4. Contract tracking and delivery
5. Technical personnel training
6. On site equipment installation and commissioning guidance
7. 7×24 continuous trouble shooting
